How to Zero a Handgun Laser

How to Zero a Handgun Laser

Lasers are relatively simple to install, especially with rail systems on modern pistols. However, correctly zeroing a handgun laser differs slightly from zeroing iron sights. While it is not difficult to mount and sight in a laser, it can cause problems if done incorrectly.

For a laser to function properly, you need to understand the sight-in process and avoid pitfalls that can cost you time and ammunition. Here is a simple five-step method to ensure that the laser you mount is ready to perform.

Step 1: Install the Laser
This may sound very basic, but these are the most common problems I’ve seen with firearms-mounted lasers. Many lasers fit on your gun’s accessory rail using an adapter plate that provides a stable mounting platform. Oftentimes, shooters who hastily mount the laser on the gun fail to ensure a solid fit, and that can lead to horrible accuracy.

While mounting a Crimson Trace laser, I noticed that all but one of the plates provided would fit in the gun’s accessory rail, though only one plate (the one prescribed for use on my gun by the factory) allowed for a stable mount. In addition, the side screws need to be secure, tight enough to hold the laser firmly in place on the accessory rail without allowing any movement. I’ve fixed two “malfunctioning” lasers for others, and in both cases it was operator error that resulted in poor accuracy.

Step 2: Get On-Target From A Rest
ou can save yourself a lot of headache and ammunition by zeroing your laser from a fixed rest rather than banging away at the board while intermittently adjusting the laser’s point-of-impact. In fact, you should be able to quickly adjust the laser and be pretty close to on-target without firing a single shot.

Before you begin fine-tuning the laser, have the owner’s manual on hand to tell you which direction you turn the sighting screws for left/right, up/down windage and elevation adjustments. You don’t want to start playing the “wrong way” game at the range.

I also make sure to bring a portable Tipton gun vise in case I need to make any adjustments, and it’s perfect for getting a laser close to center after mounting. The vise allows me to hold the handgun secure while I align the laser and iron sights with the laser tools provided.

This is a much easier way to get on target than shooting, adjusting, shooting and readjusting. It takes a little extra time, but when you fire your first shot, you should only have to fine-tune the point of impact, nothing more.

Step 3: Sight In At Longer Range
The temptation when mounting a laser on a defensive handgun is to sight in at the range you expect to shoot. It makes sense, but that’s a mistake.

Let’s say that the popular belief that most gunfights occur at about 10 feet is true, and you align your laser so that it is dead-on at that range. It will work well at that distance, but keep in mind that the laser itself is mounted well under the barrel (or, in the case of hand grips, to the side of your barrel), so the angle required to get on target is pretty steep.

That also means that at 15, 20 and 25 feet, the path of the laser continues to rise. As the distance increases, you will be farther off target. Suddenly, you’ll be missing the target and won’t understand why. Instead, sight in at 25 feet. The laser’s point of impact shift will be more gradual, and even at close range you won’t be more than an inch or so off target.

Step 4: Make Minor Adjustments
Most lasers don’t have ¼ MOA adjustments, meaning you’re often adjusting the laser by feel. When adjusting your laser, think small. Because lasers allow for a wide range of POI adjustments utilizing a limited amount of space for fine tuning, it’s easy to overcompensate and find yourself seesawing between left of center and right of center or high and low.

Step 5: Shoot Plenty of Rounds
When your laser is mounted and sighted, don’t simply shove the gun in a safe or stick it into your holster and head out.

You need plenty of range time with a laser for two primary reasons:
1. Ensure the laser is firmly planted on your gun and won’t shake loose with recoil or daily handling.
2. Feel completely comfortable with the laser system. It’s important to know that your laser is properly sighted, but it’s equally important to be sure the laser works on your gun.

After a period of a hundred rounds or more, it’s also time to check the screws and ensure the laser is still properly secured. If you installed it properly there shouldn’t be a problem, but the screws may back out just a bit and this is the time to know about it. If your laser stands up to a few hundred rounds and passes the inspection, there’s a very good chance the laser will be there when you need it. If you’ve fired enough rounds to verify the unit is secure, you’ve already started developing the muscle memory needed to shoot accurately in a stressful situation.

Final Tip: Use the ammo you intend to carry while sighting in the laser.

Rail-Mount Firearm Light/Laser Sight

Rail-Mount Firearm Light/Laser Sight 

520nm  5mW 220 lumen combo green pistol laser tactical light with pressure switch

Product Description

 The new weapon mounted green laser and flashlight is one of the most versatile accessories on the market. It mounts to any picatinny rifle or pistol rail and provides a powerful visible green laser sight along with a ultra bright LED flashlight. The push button on/off operational switches and toggle mode selector switch are very user friendly and is also supplied with a remote pressure switch for rifle applications.

 

Product name :	laser sight and led flashlight	laser wave:	532nm
laser power:	<5mw	laser working temperature:	-20℃~+50℃
laser distance (at night)	500-2000M	laser spot:	25-35mm@50M
LED output power:	220lm	LED lighting visibility:	150M
Battery:	CR2 (2PCS)	wroking voltage:	3-8.2V
sigle laser time:	2 hours	LED lighting time :	2 hours
material:	Aluminum 6061-T6	laser and led flashlight combo:	1.5 hours

 

Packaging & Shipping

Details:

Packaging Details: Packaging:1unit /gift box Unit package:gift paper box or white box Master carton:top cardboard carton

  

Delivery Detail: 3 days for sample order,7-10 business days for MOQ.

scope mount Firearm Light/Laser Sight

scope mount Firearm Light/Laser Sight 

  Tactical rifle long distance green laser sight and 1000 lumen T6 hunting flashlight combo

Product Description

 

Packaging

Details:

Packaging Details: Packaging:1unit /gift box Unit package:gift paper box or white box Master carton:top cardboard carton

  Delivery Detail: 3 days for sample order,7-10 business days for MOQ.

MIL-STD-1913 rail mount Ultra Compact Green Pistol Laser Sight

Ultra Compact Green Pistol Laser Sight 

   military usb rechargeable  rail mount subcompact gun  laser per pistola glock 

Product Feature:
USB/AC rechargeable internal battery
Super-bright green laser
Fits any handgun with rail mount including sub-compacts (Weaver/Picatinny)
Ambidextrous on/off switch
Windage/elevation adjustments
Easy installation

Product Specific Details 

5mw Green Laser

Charging Time: 30 min 

Full Charge: Led light on charger will light up green when the unit has been fully charged 

Number of Charges: Can be charged up to 1000 times before the battery will exhaust itself 

Battery Usage Time: Continuous run time 45 min to 1 hour. 

PRODUCT SPECS

LENGTH	WIDTH	HEIGHT	WEIGHT	BATTERY
1.6 in	1.11 in	1.11	0.80 oz	Rechargeable-Incld

Product Description

 

Packaging

Details:

Packaging Details: Packaging:1unit /gift box 150units/master carton Unit package:gift paper box or white box Master carton:top cardboard carton

  Delivery Detail: 3 days for sample order,7-10 business days for MOQ.

Standardization Agreement 2324 rail mount Handgun & Pistol Laser Sights for Firearms

Laser Sights for Firearms

5mw Tactical armes laser verde

 

 

Product Description

The XYH01-G Charging voltage:Inserted rechargeable 5V-7V

The Laser Sights were designed and built in Class IIIa visible red laser, green laser, and infrared laser. Laser adjustable for windage and elevation. Constructed from FRN (Fiber Reinforced Nylon) for lasting durability.
Full Charging Period: 60 minutes
Constant working time after full charge: 60- 80 minutes.
Water-resistant, shockproof and weapons recoil-proof.
Incredibly lightweight for plastic housing and durable for aluminium housing bodies. The green Lasers have excellent working performance, even the hostile environment, owned high reliability and high sensitivity.

Parameter:

 Laser color:red

laser wave: 630-660nm  /GlassIIIa

laser power: <5mw

size: 42*33*27mm

Net weight: 23.8g

working temperature: -10℃~+50℃

material: fiber reinforced nylon

package size: 73*40*122mm

pistol green laser sight structure

 

Ambidextrous activation to accomodate the left or right-handed shooter. The green Lasers have excellent working performance, even the hostile environment, owned high reliability and high sensitivity.

Packaging & Shipping

Details:

Packaging Details: Packaging:1unit /gift box 150units/master carton  Unit package:gift paper box or white box  Master carton:top cardboard carton

  Delivery Detail: 3 days for sample order,7-10 business days for MOQ.

Selling Units:	Single item
Single package size:	70X50X140 mm
Single gross weight:	0.98 KG
Package Type:	gift paper box